When the water jet cutting machine processes glass and stone, it will occasionally collapse, which greatly affects the beauty of processing. How to avoid the problems in processing, as a processing technician, we must clearly understand the reasons and do Good to avoid. Water jet Workshop tells everyone that the waterjet cutting machine appears to be “broken” because the cutting platform and the cutter head lose their balance. In a short period of time, due to too fast cutting, there are several reasons.
(1) Excessive cutting speed, the blasting ability of the water jet cutter cannot be adapted.
(2) The storage capacity of the cutting platform has increased and the water storage capacity has not been adjusted in time.
(3) The cutter head is too small or very abrasive.
(4) The cutting platform of the cutting platform is blocked by swarf and debris.
(5) In the computer system, the efficiency of image processing is greatly reduced, and the cutting path is deviant.
Once the water jet cutter has “broken”, it should be carefully identified and eliminated. The elimination method is generally to reduce or stop the processing, and watch the cutting situation, check whether the computer system has a slow response, and at the same time, look at how the cutting head wears and replace it in time