1. Ultra-high pressure water jet generator as the power source of the water jet, common is the technical solution that the hydraulic motor drives the supercharger to produce the ultra-high pressure water jet. The pressure of common tap water is increased to tens to hundreds of MPa (1 MPa is approximately equal to 10 bar), and the core parts of high-pressure cylinders and one-way valves imported from the United States are used in Asahi Waterjet high-pressure fittings. Not only the use time is greatly increased compared with common parts, but also high pressure The stability has also been greatly improved. It emits through a beam nozzle and has extremely high kinetic energy.
2. CNC processing platform, a good operating system allows users to use more convenient, Xu Sheng water knife use Huaxing and Wei Hong system This CNC waterjet is mainly based on cutting plane plate. The cutting platform adopts rolling linear guides and ball screws as the transmission. Under the precise control of the numerical control program and the control motor, the X axis and the Y axis are independently moved or the two axes are linked, and the cutting head is driven to realize straight and arbitrary curve cutting.
3. Jet cutting head The high pressure pump can only perform the cutting function through the beam nozzle. The nozzle aperture size determines the pressure level and flow rate. At the same time, the nozzle also has a concentrating effect. There are two basic types of jet cutting heads: one for pure water cutting and the other for abrasive cutting. The cutting head with abrasive cutting is based on the pure water cutting head, and is composed of an abrasive mixing chamber and a rigid nozzle.
Waterjet cutting machine is a device that uses ultra-high pressure water jet for cold cutting. It is mainly composed of high pressure pump, numerical control processing platform, jet cutting head, sand supply system and cooling system.