Sunrise water jet to share the knowledge of the water jet cutting machine. As we all know, water jet cutting is very powerful. The water jet's mold is an "L" type "tubular" object. Whether the water will impact the wall of the L-bend during the passage of the L-shape bend will cause the loss of the mold? The water jet does not wear and can be explained by the viscous phenomenon. Because of the viscous force, the water flow rate increases with the distance from the tube wall. Therefore, although the water jet has a large flow rate, the inner wall of the water jet does not wear out seriously. Secondly, the friction of water jets mainly comes from the sand grains inside, and the coefficient of viscous force of sand and water is larger, so that sand grains are more easily driven by water, so as to achieve greater speed, and the higher speed water In the center of the pipe, sand does not generally hit the pipe wall, so wear and tear is minimized.
If silica and other grinding materials are incorporated in water, the cutting ability of the water jet will also be increased exponentially, and its processing effect is obviously superior to cutting the work piece with a metal cutter. You can machine complex shapes that cannot be machined with metal tools and parts cut along arbitrary curves. In the process of processing, not only the cuts of the work pieces processed by the "water jet" are neat and smooth, there are no problems such as rough edges, delamination, tearing, deformation and the like, and the heat generated in the working process can be almost completely taken away by the water. At the same time, during the cutting process, the vibration and noise caused by the “water jet” are very small, and a small amount of generated chips will follow the flow of water, and no chip flying will occur.