A. Maintenance of the platform
1. The water cutting machine platform should always inject oil into the linear guide rail, ball screw, nut support, etc. In principle, the machine must be manually filled with oil every 2 hours of continuous operation.
2. Fill the pump with oil regularly so that the oil level is not lower than the minimum oil level mark.
3. It is necessary to regularly remove the abrasive sand and corner residue from the sink at least once a month.
4. The industrial control machine is best to be used as a special machine for water cutting machines. The hard disk must have enough space to install anti-virus software, which can meet the needs of cutting complex parts.
5. It is necessary to protect the connection cable between the electric control box and the cutting platform and the high voltage generator. It is forbidden to press or squeeze the cable. The cable should be placed in the metal line groove.
6. Always change the slats so that they do not affect the accuracy of the cut.
7. Always fill the drain valve of the tank with oil to prevent the valve from rusting.
8. The sand storage container should be kept dry. If the input sand tube and the tank are filled with water because of the return water, the sand in the sand storage container and the pipeline must be completely removed, and then dried to fill the dry new sand.
9. After the work is done every day, we must clean up the site and make safe and civilized production.