Waterjet is a very important cutting tool in metal processing or stone processing, so we not only need to look at his price when buying, but also pay attention to his service life, especially those parts of the waterjet that are easily damaged. , such as gems. In fact, the length of use of gems is also different, mainly related to a few factors.
The first is the quality of the water used for cutting. The tap water is generally used, but there are many impurities in the tap water, which may affect the gemstones of the waterjet and reduce the use time of the gemstones. Therefore, the purity of the water must be guaranteed. If necessary, consider increasing the water filtration equipment.
Followed by the purity of the waterjet sand, the sand we buy is generally pomegranate sand, but if you do not trust its purity, you can use the automatic sand grit.
Again the quality of the gem itself, due to price reasons, many are still selected domestic gemstones. However, due to the wide variety, you need to distinguish when choosing, and try to buy the precious stones that are cost-effective.
The final is the thickness of the cut material, because the waterjet will produce a reaction force while cutting the material. It will act on the gemstone of the waterjet and it will also wear out on the gemstone. The greater the thickness of the cut material, the greater the force and the more serious the damage to the gemstone.
Therefore, when selecting the gem on the waterjet, it is necessary to comprehensively consider these aspects and find the product that best meets the requirements.