The Xusheng water knife automatically supplies the sand to the sand tank, and the compressed air enters the upper part of the pressure sand tank through the air valve. Under the action of the compressed air, the abrasive in the pressure sand tank intermittently flows into the storage sand on the work bench through a piece of hose. box. Provides efficient, convenient, safe, and simple energy for water cutting machines.
Xu Sheng water knife for the use of sand is very simple:
1. Open the lid for the jar and pour the abrasive from the waterjet cutter into it.
2, open the air compressor, and other pressure up to the pressure of about 0.6-0.8 MPa when the pressure is adjusted to 0.2-0.3 MPa or so, pull the button around the rotation to adjust the pressure, after the adjustment is completed press the button operating.
3. Open the main switch of the power supply box for the sand bucket. When sand supply is needed, switch the rotary switch to the supply position. When the lid is put back to the original place and the sand is automatically supplied, the system will detect the limit of the sand in the bucket and supply it automatically.
4. The user wants to stop the supply at any time and switch the knob switch to stop the supply.