It is well known that the water cutting machine has a strong cutting ability, but this does not mean that it will not fail during use. Since the water cutting machine faces a wide variety of materials, its performance varies, so it will inevitably result from Some unexpected situation encountered failure.
In this case, the fault of the water cutting machine should be immediately fed back to the manufacturer so that the fault-oriented and rapid maintenance can be performed efficiently under the guidance of professional technicians, so that the water cutting machine can return to normal as soon as possible so as not to affect the effect. Work process and workload.
When the water cutting machine is in working condition, the occurrence of moisture and water leakage should be avoided as far as possible so as not to affect the motor of the equipment and even cause damage. In order to reduce similar problems, the daily use of the water cutting machine should be checked in advance, and the fault should be repaired immediately, so that the water cutting machine can have a higher temperature value during processing.
If the water cutting machine is abnormal, the first thing to check is whether the oil pipe leaks or if it leaks. If so, trouble should be eliminated in time to prevent the water cutter from being blocked and unable to operate normally. The lubricating oil can be periodically added to the nut of the supercharger of the water cutting machine, effectively preventing the occurrence of snaking phenomenon, thereby speeding up the working efficiency of the water cutting machine.
In addition to reasonable maintenance can improve the working efficiency of the water cutting machine, suitable parameter settings and the use of cutting methods, and the use of numerical control systems, etc., can play a very favorable role in this regard