There may be many unexpected problems encountered when using waterjets for processing. For inexperienced people, it is very time consuming and laborious to solve. If you can master some techniques, you can also make waterjet processing more smooth and its value can be fully utilized.
In fact, the waterjet system can use ordinary tap water, as long as the water is softened before entering the supercharger through the pump inlet filter, the purpose is to be able to purify the water, become "unsaturated" water, the cutting effect and The waterjet itself is very advantageous.
Since the size of the cutting air gap is strictly regulated by the water jet cutting, in order to avoid the cutting air gap being larger than 0.5 mm, the surface is rough when cutting the lower layer; when the stack is cut, keeping the sheets neatly put together can accomplish this. a little.
In order to reduce the surface atomization, underwater cutting can be considered because the underwater cutting can reduce the atomization of the surface or the upper edge caused by the sand waterjet cutting process, and greatly reduce the noise during cutting, and at the same time, the work environment is more tidy and orderly. .
If you use different meshes of abrasives for different jobs, consider adding a small or large sand bucket, which will make the whole work cycle more compact and efficient.