1. The traditional dust removal method of the water jet cutter is: natural ventilation or mechanical ventilation. Regardless of whether natural ventilation or mechanical ventilation is used, the water knife cutting machine dust is directly or indirectly discharged into the air.
This treatment method does not take into account the large amount of splashes and large particle dust that are generated when cutting and damage to the machine and workers.
2. Titanium and magnesium purification equipment: The large amount of splashes and large particles generated by cutting will be separated inside the titanium-magnesium plasma cutting and purifying system, avoiding entering the purification system and affecting its performance, prolonging the service life of the filter barrel. And improve the safety factor, than the traditional dust removal table dust cleaning effect will be better.
3, dust cutting system through the modular design, according to customer requirements to provide different sizes of modules in the field splicing assembly, or increase as needed.
4. The dust removal system is mainly to divide the cutting platform into several equally divided partitions. In each partition there is a hopper that can be used for ventilation and can hold grey. A damper is set at the end of the partition, which is linked with the cylinder. When the water jet cutter goes to any position, the corresponding damper will automatically open and always ensure that the smoke is generated in the place where the cut is generated. This type of dust removal method greatly reduces the amount of air used. At the beginning of the generation, after nearly 30 years of industrial development, around 2010 will enter a period of rapid growth.