Today, the technical staff of Sunrise Water jet will introduce the daily maintenance steps of the water jet pressurization generator, hoping to help everyone.
Before starting up:
- Check whether there is any water leakage in the water pipes for cooling water and cutting water to ensure smooth water supply.
2, check the high pressure water tank, cylinder head circumference should be no cracks.
3, open the front cover before and after the turbocharger, check the pressurized switch cylinder magnetic switch circuit for damage, confirm the magnetic switch seat, the oil tank and four squares without oil leakage.
- Check whether the oil level of the fuel tank meets the requirements and whether there is any damage to the oil in or out. If any obvious oil pollution is found, check whether the machine has oil leakage.
- Listen to the pump when there is no noise.
- Remember to start the booster pump motor first, then turn on the booster after 3 seconds, otherwise an accident will occur.
- If no abnormality is found in the above checks, the machine is in a stable state and can be used normally.
- Check whether there are abnormal noises during the supercharging process and observe whether the supercharger has obvious vibration.